WEST SYSTEM Specialty Epoxies are cure-compatible with each other, and also with the 105 System. If you wish to blend one with another, first mix on ratio the resin and hardener from one of our specialty epoxies, then add it to mixed on-ratio resin and hardener from another. For example, to speed the cure of 105/205 you may mix a batch of this at the correct (5:1 – one pump each with our calibrated mini pumps) then blend with mixed 1:1 ratio G/5 Five-Minute Adhesive or G/flex Epoxy.
WEST SYSTEM Specialty Epoxies
G/flex Specialty Epoxies are easy-to-use, toughened, resilient, two-part specialty epoxies designed to make structural bonds that absorb the stresses of extraordinary expansion, contraction, shock, and vibration. These epoxies have excellent adhesive properties and are engineered to grip tenaciously to metals, plastics, glass, masonry, fiberglass, and wet and difficult to bond woods. Easy-to-use 1:1 mix ratio gives you 46 minutes of pot life and a long open time (or working) time of 75 minutes at 72°F. Reaches an initial cure in 3-4 hours and a workable cure in 7-10 hours. G/flex Specialty Epoxies are available in two consistencies:
G/flex 650 Epoxy
G/flex 650 Epoxy is a versatile, easily modified liquid epoxy. It is packaged in the Aluminum Boat Repair Kit or individually in a variety of sizes from pairs of 4 oz bottles to industrial size drums. This epoxy is a popular choice for aluminum boat repairs.
G/flex 655 Epoxy
G/flex 655 Epoxy is a convenient pre-thickened epoxy. It is packaged in the Plastic Boat Repair Kit or individually in a variety of sizes from pairs of 4 oz squeeze tubes to industrial size drums. This epoxy is a popular choice for plastic boat repairs.
Read more about the development of G/flex Epoxy at Epoxyworks.com.
Six10 Thickened Epoxy Adhesive
Six10 is two-part thickened epoxy adhesive in a convenient, self-metering cartridge. For permanent, waterproof, structural gap filling and gluing. Bonds to wood, fiberglass, metals, and masonry. With the 600 Static Mixer (included) you can dispense fully mixed adhesive right where you need it using a standard caulking gun. Trim the mixer tip to suit your job. A 1/8″ diameter tip opening will give you a bead of adhesive about 40′ long. Working time is 42 minutes at 72ºF. Six10 cures to a solid in 5-6 hours and takes loads in 24 hours.
G/5 Five-Minute Adhesive
The only one of our specialty epoxies that we don’t consider a structural adhesive, G/5 Five Minute Adhesive is an incredibly handy glue to keep around the house or shop. G/5 is an easy-to-use, fast curing, versatile epoxy system that’s well suited for quick repairs, tooling, and general bonding. It is a strong, water-resistant adhesive that you can thicken as necessary with WEST SYSTEM Fillers. Bonds to wood, fiberglass, and metal. Cures in 3 to 5 minutes at 72ºF. G/5 available in a variety of sizes from pairs of 4 oz bottles to industrial size drums.